Design
Aqua Cat
Designed by Glen-L Marine
An 18 ft 2 in power catamaran cruiser from Glen-L Marine, twin sheet plywood hulls under a deck with room for a double bunk, head and galley, or built cabinless as one 11 ft cockpit for diving or fishing. Twin outboards to 150 hp total, about 850 lb. Glen-L publish a beam of 8 ft 0 in and a hull depth of 33 in.
They put the usual load at 1 to 4 people. The hull is a twin hulls developed for sheet plywood planking. They draw a matching trailer for her. Two simple plywood hulls and a deck; full-size patterns for stems, transom and every frame. Budget 500 to 900 hours. Measured medians from logged builds are below.
What building a Aqua Cat actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Aqua Cat here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Biscayne 18 | Glen-L Marine | 18′ 2″ (5.54 m) | 0 |
| Mist Miss | Glen-L Marine | 18′ 2″ (5.54 m) | 0 |
| Silver 55 | BCA Demco | 5.55 m (18′ 3″) | 0 |
| Honker 18 | Devlin | 18′ 3″ (5.56 m) | 0 |
| Little Hunk | Glen-L Marine | 18′ 3″ (5.56 m) | 0 |
| 18' Seecruiser | Boatkits | 5.59 m (18′ 4″) | 0 |