Design
Eagle
Designed by Glen-L Marine
A 22 ft trailerable lobster boat from Glen-L Marine, a scaled-down round-bilge New England workboat built over temporary forms in conventional strip planking or a strip core with double veneers, sheathed in glass, three-quarter inch minimum; separate plans exist for one-off fiberglass. Berths for two; central inboard, stern drive or outboards. Glen-L publish a beam of 7 ft 11 in and a hull depth of 4 ft 7 in.
The bare hull comes out at about 1000 lb. Displacement is 3600 lb. Headroom below is 4'-4". The hull is a round bilge with flat run aft, skeg, and flaring topsides characteristic of New England lobster boats. They draw a matching trailer for her. Strip planking a round-bilge 22-footer is patient work but well documented for the home builder. Budget 800 to 1,400 hours. Measured medians from logged builds appear below.
What building a Eagle actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Eagle here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Dunlin 22 Cruiser | Devlin | 22′ 0″ (6.71 m) | 0 |
| Godzilla 22 | Devlin | 22′ 0″ (6.71 m) | 0 |
| Hideaway 22 | Devlin | 22′ 0″ (6.71 m) | 0 |
| Wildcat E_X_T Sport | Glen-L Marine | 22′ 0″ (6.71 m) | 0 |
| Extreme Flats 22 | Bateau | 22′ 1″ (6.73 m) | 0 |
| La Paz 22 | Glen-L Marine | 22′ 1″ (6.73 m) | 0 |