Design
Jet Setter
Designed by Glen-L Marine
A 20 ft 3 in whitewater jet sled from Glen-L Marine, equally at home on rivers, lakes and towing skiers, drawn in windshield and center-console versions with a 6 degree aft vee option for inboard jets. Half-inch plywood bottom over heavy sawn frames, or welded aluminum, with three rub rails a side; outboard, I/O or inboard jet. Glen-L publish a hull depth of 31 in or 33 in.
The bare hull comes out at about 950 lb. For power they specify 75 to 230. A straightforward, sturdy plywood build. Budget 500 to 800 hours. Measured medians from logged builds appear below.
What building a Jet Setter actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Jet Setter here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Bullfrog 20 | Devlin | 20′ 3″ (6.17 m) | 0 |
| Panga 20 | Bateau | 20′ 3″ (6.17 m) | 0 |
| Riviera | Glen-L Marine | 20′ 3″ (6.17 m) | 0 |
| Hi Rider | Glen-L Marine | 20′ 2″ (6.15 m) | 0 |
| Pelicano 20 | Devlin | 20′ 2″ (6.15 m) | 0 |
| River Rat | Glen-L Marine | 20′ 2″ (6.15 m) | 0 |