Design
Rampage
Designed by Glen-L Marine
An 18 ft deep-vee inboard ski boat from Glen-L Marine drawn for jet pump power, with a 12 degree deadrise, ocean-racer style lift strakes, broad flare all the way aft and a radiused cockpit that shows off the motor. Sheet plywood, about 750 lb; vee-drive details included. Glen-L publish a beam of 7 ft 1 in and a hull depth of 23 in.
They put the usual load at 2 to 4 people. For power they specify inboard, stern mounted engine driving through a vee drive or jet pump. They draw a matching trailer for her. A conventional plywood build with a jet installation. Budget 500 to 850 hours. Measured medians from logged builds appear below.
What building a Rampage actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Rampage here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| 18 ft Flat Bottom 492 | Response Marine | 18′ 0″ (5.49 m) | 0 |
| 18 ft Texas Skiff | Benford Design Group | 18′ 0″ (5.49 m) | 0 |
| AF4 | Jim Michalak | 18′ 0″ (5.49 m) | 0 |
| Bay Pilot 18 | Arch Davis Design | 18′ 0″ (5.49 m) | 0 |
| Desperado | Glen-L Marine | 18′ 0″ (5.49 m) | 0 |
| Flats Stalker 18 | Bateau | 18′ 0″ (5.49 m) | 0 |