Design
Renegade
Designed by Glen-L Marine
A 20 ft 8 in deep-vee ski boat from Glen-L Marine, a long, lean runabout and mini day-cruiser drawn for big outboards but equally happy with a stern-mounted inboard on a jet, vee drive or I/O, all covered on the plans. 12 degree deadrise with lift strakes, flaring sides, a big luxurious cockpit; sheet plywood, about 1,000 lb. Glen-L publish a beam of 7 ft 11 in and a hull depth of 31 in.
The bare hull comes out at about 1000 lb. They put the usual load at 1 to 4 people. The hull is a full length deep vee bottom with 12o deadrise and flaring sides. Developed for sheet plywood planking. They draw a matching trailer for her. A large but conventional plywood runabout. Budget 600 to 1,000 hours. Real hours from logged builds are below.
What building a Renegade actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Renegade here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Albert E | Glen-L Marine | 20′ 7″ (6.27 m) | 0 |
| Chinook 21 | Devlin | 20′ 9″ (6.33 m) | 0 |
| Fishing 20 | Dudley Dix Yacht Design | 20′ 9″ (6.33 m) | 0 |
| Kokanee | Glen-L Marine | 20′ 6″ (6.25 m) | 0 |
| Mackinaw | Glen-L Marine | 20′ 6″ (6.25 m) | 0 |
| Party Boat | Glen-L Marine | 20′ 6″ (6.25 m) | 0 |