Design
Rogue Runner
Designed by Glen-L Marine
A 17 ft 6 in inboard or outboard whitewater sled from Glen-L Marine for wide, rock-strewn rivers, with an upswept pram bow, some vee forward, a flat run aft and six sawn frames crossed by longitudinals. Sheet plywood sheathed in epoxy and glass, or welded aluminum; jet outboard, inboard jet, or prop drive where depth allows.
Simple, inexpensive and robust plywood construction. Budget 400 to 650 hours. Real hours from logged builds are below.
What building a Rogue Runner actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Rogue Runner here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Dragonfly | Glen-L Marine | 17′ 6″ (5.33 m) | 0 |
| Gentry | Glen-L Marine | 17′ 4″ (5.28 m) | 0 |
| L Capitan | Glen-L Marine | 17′ 3″ (5.26 m) | 0 |
| Thunderbolt | Glen-L Marine | 17′ 3″ (5.26 m) | 0 |
| 17' Motorboot | Boatkits | 5.24 m (17′ 2″) | 0 |
| Bo Jest | Glen-L Marine | 17′ 10″ (5.44 m) | 0 |