Design
Scrambler
Designed by Glen-L Marine
A 15 ft 6 in outboard whitewater sled from Glen-L Marine, compact and nimble for tight, fast rivers, with five heavy frames, a half-inch bottom, an upswept pram bow and an integral splash rail. Sheet plywood or welded aluminum; 20 or 25 in shaft outboard with a jet pump or prop. Glen-L publish a hull depth of 2 ft 1 in.
The bare hull comes out at about 550 lb. For power they specify 35 to 100. They draw a matching trailer for her. Easy to trail, easy to build and easy on the wallet, in Glen-L's words. Budget 300 to 500 hours. Measured medians from logged builds appear below.
What building a Scrambler actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Scrambler here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Chum | Grandpa's Archive | 15′ 6″ (4.72 m) | 0 |
| Duck Skiff 15 | Bateau | 15′ 6″ (4.72 m) | 0 |
| Jon Boat / Garvey 15 | Bateau | 15′ 6″ (4.72 m) | 0 |
| Sculldugery 15 | Devlin | 15′ 6″ (4.72 m) | 0 |
| Sherwood Queen | Glen-L Marine | 15′ 6″ (4.72 m) | 0 |
| Bass Boat | Glen-L Marine | 15′ 5″ (4.7 m) | 0 |