Design
Sherwood Queen
Designed by Glen-L Marine
A 15 ft 6 in mini tugboat from Glen-L Marine with a small pilothouse for a helmsman and a passenger or two, recessed walk-around decks and towing bitts. Sheet plywood, about 600 lb, and only a 10 hp outboard, concealed in a well if you like, or a small inboard. Glen-L publish a beam of 7 ft 4 in, a hull depth of 3 ft 11 in and a draft of 8 in.
They put the usual load at 2 to 3 people. The hull is a vee bottom hard chine developed for sheet plywood planking. They draw a matching trailer for her. Prepared for a builder with limited experience, with step-by-step instructions. Budget 300 to 500 hours. Real hours from logged builds show below.
What building a Sherwood Queen actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Sherwood Queen here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Chum | Grandpa's Archive | 15′ 6″ (4.72 m) | 0 |
| Duck Skiff 15 | Bateau | 15′ 6″ (4.72 m) | 0 |
| Jon Boat / Garvey 15 | Bateau | 15′ 6″ (4.72 m) | 0 |
| Scrambler | Glen-L Marine | 15′ 6″ (4.72 m) | 0 |
| Sculldugery 15 | Devlin | 15′ 6″ (4.72 m) | 0 |
| Bass Boat | Glen-L Marine | 15′ 5″ (4.7 m) | 0 |