I decided on a rope hemp 3/4" inch rub rail to save on weight and to keep the traditional looks of the boat. It is mounted with 1 inch stainless steel screws that are spaced. 5 inches apart. I wrapped the handles in leather to secure the rope rub rail and acce...
Read this entry in the log → Hardware & Fit-Out on every Ultralight Dinghy →Hardware & Fit-Out
Cleats, rudder and centerboard, tiller, oarlocks, deck gear.
60 entries from 6 logs, newest work first.
Ultralight Dinghy
Mark Elwell
1 entry
· 24 h · latest 21 Jul 2026
The Guider
Jeffrey Marso
6 entries
· latest 14 Feb 2026
I finally finished off the rudder cassette. This was one of the most protracted and fiddly assemblies of the whole build. The major remaining tasks were to drill the holes in the rudder post, rudder cheeks, and tiller head, and then assemble everything. All t...
Read these entries in the log → Hardware & Fit-Out on every The Guider →
Northeaster Dory
Matt
1 entry
· 3 h · latest 7 Aug 2020
Lastly you can see I am fitting the rudder for hardware assembly.
Read this entry in the log → Hardware & Fit-Out on every Northeaster Dory →
Grey Seal
Andrew Donald
1 entry
· latest 5 Feb 2020
thanks KNG , looks fantastic but a different boat? Mine is centreboard and gaff rig rubbing strakes fitted and plugged
Read this entry in the log → Hardware & Fit-Out on every Grey Seal →
14 ft Rapid Robert
Joshua Feil
11 entries
· latest 28 Feb 2014
some new additions..... beefed up custom fitted whitewater oarlocks
Read these entries in the log → Hardware & Fit-Out on every 14 ft Rapid Robert →
Hot Rod
Kane Custom Boats Ltd.
40 entries
· latest 19 Jul 2011
Here's the finished dash. (Click the image for a higher resolution photo).
Read these entries in the log → Hardware & Fit-Out on every Hot Rod →