Not much photographically to report given that I’m sanding, filling and generally preparing to undercoat with hi-build primer. One thing I wish I’d taken a lot more care with is shaping the epoxy fillets, they are a bugger to get smooth after they’ve set. Fort...
Read these entries in the log → Paint & Finish on every Grey Seal →Paint & Finish
Primer, topcoat, bottom paint, boot stripe, lettering.
54 entries from 6 logs, newest work first.
The photos are about finishing up the anchor locker hatch. In 3 you can see how I painted latex over epoxy, and it looks pretty good. A while later, in 5 you can see a near-total failure of the latex to hold onto the epoxy. I am not sure what happened here. I...
Read these entries in the log → Paint & Finish on every The Guider →Phase 15: Painting the Exterior On this next step, I painted the exterior. It took two or three coats before I got it completely level, sanding lightly between each one. I went with a blue paint from TotalBoat, and I think it turned out pretty well.
Read this entry in the log → Paint & Finish on every Northeaster Dory →Houseboat update, Thursday, January 17, 2019... It's still a little too cold to venture out into the driveway to work on Jersey Girl, so I thought I'd go where it's a little hotter, or colder, or hotter, or... Hot off the easel: "In the Beginning," watercolor,...
Read this entry in the log → Paint & Finish on every Jersey Girl →A lot of progress has been made in August, mostly in paint in Varnish, but a few hardware additions as well, and the B&T is steadily approaching her initial float! After Priming the hull we used a 2 part industrial polyurethane as a basecoat, then topped it of...
Read these entries in the log → Paint & Finish on every 14 ft Rapid Robert →1. An hour later, we topcoated the white base coat with single stage Sherwin Williams Genesis GC 3.5 VOC Acrylic Polyurethane. The color was custom mixed Corvette Yellow. 2. Masking tape was removed four hours later. 3. Unfortunately the topsides won't be pain...
Read these entries in the log → Paint & Finish on every Hot Rod →