Design
Bingo
Designed by Glen-L Marine
A 12 ft 8 in stitch-and-glue deep-vee runabout from Glen-L Marine with a driver's seat set forward under a long cowl deck, a 12 degree vee with built-in lift strakes, and swept deck lines. Standard quarter-inch plywood folded and stitched with over 25 full-size patterns; about 240 lb, outboards to 40 hp. Glen-L publish a beam of 5 ft 0 in.
They put the usual load at 2 to 3 people. The hull is a fAST-G Stitch and glue construction with sheet plywood developed to assemble flat and fold to form a 12o vee bottom with built-in chine lift strakes and spray deflector. They draw a matching trailer for her. Glen-L calls it an excellent first boatbuilding project for almost anyone. Allow 100 to 200 hours. Measured medians from logged builds appear below.
What building a Bingo actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Bingo here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Airboat | Glen-L Marine | 12′ 9″ (3.89 m) | 0 |
| Runabout 12 | Bateau | 12′ 6″ (3.81 m) | 0 |
| 12' Garvey Jolle | Boatkits | 3.76 m (12′ 4″) | 0 |
| Fisherman | Glen-L Marine | 13′ 0″ (3.96 m) | 0 |
| Jon Boat / Garvey 13 | Bateau | 13′ 0″ (3.96 m) | 0 |
| L Dorado | Glen-L Marine | 13′ 0″ (3.96 m) | 0 |