boatbuildlog

Design

Centerfold

Designed by Glen-L Marine

A 7 ft 10 in plywood pram from Glen-L Marine that folds or takes apart across the middle, so a small cruiser can stow a tender that would otherwise not fit. Each half is light to carry, the mast on the sailing version can be made in two pieces, and it rows, sails or takes a 3 hp outboard. Glen-L publish a beam of 4 ft 0 in.

They put the usual load at 1 to 2 people. Sail area is 39 sq ft. The hull is an arc bottom pram, hard chine developed for sheet plywood planking. May be taken apart or folded across the middle for storage or portage. The pieces are non-nesting. For power they specify intended for rowing, sailing, or 3 hp max. Simple and cheap: no lofting, no building form, no frames. A beginner should allow 50 to 100 hours, more with the sailing rig, for which Glen-L sells hardware and sails. Medians from logged builds are below.

What building a Centerfold actually takes

Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.

0
Build logs
0
Launched
n/a
Median hours
n/a
Median months

Those medians firm up as more people log this boat.

Builds of this boat

Nobody has logged a Centerfold here yet.

If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.

Start the first log of this boat

Boats like this one

Same type, closest in length.

Design Plans from LOA Logs
Dinghy 5 Bateau 7′ 10″ (2.39 m) 0
Eight Ball Glen-L Marine 7′ 10″ (2.39 m) 0
Mickey Mouse Plyboat 2.4 m (7′ 10″) 0
Mighty Mouse Plyboat 2.4 m (7′ 10″) 0
Eastport Nesting Pram Chesapeake Light Craft 7′ 9″ (2.36 m) 0
Eastport Pram Chesapeake Light Craft 7′ 9″ (2.36 m) 0