Design
Coronado
Designed by Glen-L Marine
A 25 ft 8 in convertible flying-bridge cruiser from Glen-L Marine for sportfishing or family cruising: oversize vee berth, complete galley, a dinette that makes a double, enclosed head with room for a shower, bridge controls and a 9 ft self-bailing cockpit. Modern deep-vee hull in half-inch sheet plywood over sawn frames, or welded aluminum; I/O to 1,300 lb or single or twin outboards.
Glen-L says building it is neither difficult nor expensive, with full-size patterns for the seven frames. Budget 1,200 to 2,000 hours. Measured medians from logged builds appear below.
What building a Coronado actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Coronado here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Nor'wester | Glen-L Marine | 25′ 8″ (7.82 m) | 0 |
| Bear-Cat Sport | Glen-L Marine | 25′ 6″ (7.77 m) | 0 |
| Lucky Pierre | Glen-L Marine | 25′ 11″ (7.9 m) | 0 |
| 25' Motorboot | Boatkits | 7.75 m (25′ 5″) | 0 |
| Amak 26 Tugboat | Devlin | 26′ 0″ (7.93 m) | 0 |
| Eureka | Glen-L Marine | 26′ 0″ (7.93 m) | 0 |