Interior finish
Read this entry in the log → Interior & Cockpit on every Custom Mini Sportfish →Interior & Cockpit
Bulkheads, seats, buoyancy, sole, storage.
61 entries from 10 logs, newest work first.
Finished sanding down earlier epoxy crimes, applied two more coats of epoxy to help fill out and cover spots where the sander had blown through. Also started prepping steering gear for varnish.
Read this entry in the log → Interior & Cockpit on every Jimmy Skiff II →I would move the seating a tiny bit forward Ten hp is enough to plane but with two you need to lean forward to get it up on the plane , even in a new finer prop
Read this entry in the log → Interior & Cockpit on every Squirt →Struck a waterline, more taping for the green accent, stripe under the rub rail.
Read these entries in the log → Interior & Cockpit on every Ultralight Dinghy →I purchased the non-skid foam package from CLC. I like the idea, and I think it looks good. The semicircular cutouts are for the hatch pulls. It was pretty easy to apply but I should have thought it through a bit more and maybe dry fit everything. As it is, i...
Read these entries in the log → Interior & Cockpit on every The Guider →Time for an update I think cos engine stuff is slowed waiting for bits. I’ve started constructing the cockpit lockers so that the fuel tank has a home and the engine control lever gets fitted into the opposite locker on port side. this is the starboard locker...
Read these entries in the log → Interior & Cockpit on every Grey Seal →Phase 16: Building the Inwales Next, I built out the inwales, and I chose to go with spaced inwales. I think they look much better on the finished boat, as you can see here. That said, they're a ton of work. This option probably added an extra ten to fifteen h...
Read these entries in the log → Interior & Cockpit on every Northeaster Dory →Houseboat update, Thursday, January 16 -- Jersey Girl's aft cabin door is, if I may use the expression without intending any offense, well hung. It opens and closes freely, and with its opening, screened window in place, I think it looks pretty good. I still h...
Read these entries in the log → Interior & Cockpit on every Jersey Girl →Next step is fitting and installing the seat. I used white oak for this, and I think it turned out nicely. Measure your best, and fillet the rest :-)
Read this entry in the log → Interior & Cockpit on every Polliwog 8 →Just a few photos this week, rain has been slowing us down. We've added another coat of epoxy inside and out, and begun sanding and prep for the paint. The transom has been detailed as well with some nice sapelle, which was cut, biscuited and epoxied to the do...
Read these entries in the log → Interior & Cockpit on every 14 ft Rapid Robert →