boatbuildlog

Northeaster Dory · new build

Northeaster Dory to be assembled in Cologne Germany

It is the first boat I build. I‘ll do it in my single garage and partly in my cellar.

Make a book Feed The whole log, 5 entries and every photo, laid out as a book to print, bind and keep.
23
Entries
121
Hours
32
Days elapsed
65
Photos
Oct 2026
Started
Watch the 30 second boat build video

The film on its own page

See Hull Panels on other boats →

Hull Panels · compare · other boats 1 h Link

Damage by transportation company

The day before yesterday I finally unboxed the big parts of the hull. Unfortunately I found some of the puzzle joints of panel 2 and the bottom cracked as a matter of handling by the transportation company. I fixed it by using a pipet filled with a little thickened epoxy to inject it into the cracks. It took me about an hour to fixe it.

1 Northeaster Dory: Damage by transportation company
2 Northeaster Dory: Damage by transportation company
Matt 4 weeks ago

Yikes. I'm sure CLC would cut and send you some new parts. But honestly it looks minor, and repairable.

Denis 4 weeks ago

Got in touch with the clc retail company here in Germany . They were pretty sure that the way I fixed it shall work.

Hull Panels · compare · other boats 1.5 h Link

Puzzle the bottom and top of panels 1 + 2

Yesterday I found that my first aid was successful so I took another 90 minutes to glue the bottom + the ends of panels 1 + 2. As you can see I use my table tennis board for the glueing to have enough straight surface. I already started heating the garage to keep the temperature above 15 degrees celsius during the night to assure a solid curing process. I am still trying to meet the right mix of thickened epoxy. But it seems to be a good experience to work different types of thickness. I will be an advantage when it comes to the fillets and other filling jobs.

Matt 4 weeks ago

It's coming together :)

Hull Panels · compare · other boats 3 h Link

Puzzle + sanding joints etc.

Started sanding the first puzzle joints. The once of panel 1 + 2 were quite good. It needed just a little sanding. With the bottom of the hull I got a little trouble. I should have taken better care that every piece of the puzzle fits good together and everything is at the same level. It took me quite a while to sand it all smooth. Especially below the joints was a lot of cured thickened epoxy. Hopefully the picture shows what I am trying to explain.

After sanding I added the bow tips of panels 1 + 2 and attached the stern tips to panels 3 + 4. Because of limited space I couldn’t do it all in one step.

It took me about 3 hours. In the evening I had a couple of beers with my good friend and owner of „the compass“. I introduced him to the stage I am in now and some of the stuff I bought for the project. Besides that I did a little sanding of the transom and the frames. I decided not to count that (fun) time.

1 Northeaster Dory: Puzzle + sanding joints etc.
2 Northeaster Dory: Puzzle + sanding joints etc.
3 Northeaster Dory: Puzzle + sanding joints etc.
Hull Panels · compare · other boats 7 h Link

Started working on the hull.

The day started with sanding the remaining joints of panel one and two. The goal was to get started building the hull in the evening together with my older brother. To reach that goal it was necessary to finish gluing all the panel parts. So finally I had to attach the bow panels of panel 3 and 4. I spent about two hours in the morning and let the epoxy cure till the evening.

My brother arrived around 5pm. Before we started working we had a delicious meal. We started at 7:15pm. The epoxy on panel 3 and 4 cured as expected. We removed panels and the table tennis from the garage. The cart was set into place to start the assembly. Taking a closer look at the bottom we noticed that the little holes to set the frames were missing. Because my brother brought his router we decided to drill them. As you can see in the pictures, where all frames are sat in place, we really succeeded.

We worked our way from panel one, to the transom and the right part of panel two until 00:15am (5 hours). From twisting copper wire my fingertips are burning now but the result makes me pretty happy. While we were attaching the frames to panel one we had a phone call from my son. He spends halve a year in Canada for a school exchange program. It was nice to talk to him. And it seems that my daughter had her very first date tonight. Fun fact, the boy told me he can sail and his uncle has a boat too.

1 Northeaster Dory: Started working on the hull.
2 Northeaster Dory: Started working on the hull.
3 Northeaster Dory: Started working on the hull.
4 Northeaster Dory: Started working on the hull.
5 Northeaster Dory: Started working on the hull.
Hull Panels · compare · other boats 7 h Link

Turned the hull over

My brother and I started working on the hull around 9:30 this morning. We worked our way from panel to panel. Panels 3 & 4 still needed a bit of sanding. Cause this panels are so long we just put them on the floor of the garage for sanding. I kept some of the long cardboard pieces and lined the up on the floor. We gained some speed with copper wire. Now that we are good at it there is no more such work left. After retwisting every single wire with pliers, we were able to flip the hull. Upside down we had to fix some more wood to the cart to extend its width so the hull can easy rest on it. But that was not a big deal. I am really happy that the complete boat still fits into the garage. If I hafe to work with closed doors I have to crawl underneath to get to the other side. This way I am able to keep it dry and worm. That’s worth it. After a coffee break I had my first experience with filling the gap between the bottom and panel 1. The pastry bag did a great job. It worked well, easier than I expected. Tomorrow I have to seal the gaps between all the panels. The gaps at the bow between 2&3 are quite not existing. Any suggestions? I thought about loosening the wires and putting toothpicks between the panels to open the gap.

1 Northeaster Dory: Turned the hull over
2 Northeaster Dory: Turned the hull over
3 Northeaster Dory: Turned the hull over
4 Northeaster Dory: Turned the hull over
5 Northeaster Dory: Turned the hull over

Others building the Northeaster Dory

The same boat, in somebody else's shop.

All Northeaster Dory logs, with the medians