Glen-L Hot Rod

Prior to panel removal, keel, chine, batten, and butt block locations were traced with a pencil from inside the boat. Areas not to be covered with epoxy were taped off. The taping is extra work but saves a lot of cleanup time ! Epoxy was applied to both mating surfaces and allowed to set for several minutes. West System 403 adhesive filler was added to the catalyzed epoxy and spread over the mating surfaces. To aid fastener removal from the panel once the epoxy cures, strips of plastic film were slid under the plywood washers.

Back from the machine shop.

1. Once we got the control rod back from the machine shop, the turnbucles were trial fitted.

2. Now to cut the foot pedal control rod, thread the end to accept the clevis end and mark the control rod for the 1/4" wide keyway.

1. The cavitation plate is fastened to the transom with 5/16" x 3-1/2" stainless steel button head machine bolts. Every second bolt hole was overbored to 1/2" and filled with an epoxy and West System 403 filler.

2. A 1/4" hole was bored slightly above the bolt hole. The thickened epoxy slurry was loaded into a syringe and pumped into the bolt hole. Once cured, the cavitation plate was reinstalled, a 5/16" drill bit was used to locate the mounting holes.

3. Here's an excerpt from the Glenwood Marine Catalog explaining how the cavitation plate override system works: "On high speed boats, quick accurate setting of the cavitation plate is desirable for safety and best performance. Using a combination Foot Control and Control Handle with an Override Assembly makes such adjustment quick and positive. Usually the cavitation plates are set by the hand control to the desired pitch. However, when quick acceleration is desired, or when the bow of the boat needs to be brought down instantly, the foot control can be depressed to override the hand control. When the foot control is released, the cavitation plate will will return to its initial pre-set pitch."

Latest Updates It has been a while since our last update ! We've been busy installing an adjustable cavitation plate on the boat. The installation required pulling the starboard fuel tank and fabricating a new shaft to mount the cavitation plate pedal and gas pedal. We also shot some Corvette Yellow on the transom while we were at it. We hope to have the boat back in the water early next week. We'll be leaving September 3rd for the 1200 mile ride to the 2012 edition of the Glen-L Boatbuilder Gathering at Lake Nickajack, Tennessee, September 7-9 2012. Click here to see the cavitation plate installation photos.

Gathering of Glen-L Boatbuilders at Lake Nickajack Tennessee, September 7-9, 2012. We had a great time at the 2012 edition of the Glen-L Boatbuilder Gathering held at Lake Nickajack, Tennessee. wnd would like to thank everyone who made it happen. The hospitality and camaraderie at this event keeps us coming back every year ! We're already making plans for next year... Here's the first cut of Gayle Brantuk's ride in the Hot Rod : Click the 'Play' button (>) to see the video. I'd like to thank Gayle for taking time out from her busy schedule to attend the Gathering, Neel Thompson for providing the video chase boat and Nick for shooting the video. We'll post more videos soon ! Click on the links below to see more : G6 was G-Great! (Glen-L Boatbuilder Blogs, posted by Gayle Brantuk) G6 Boat Videos (Glen-L Boatbuilder Forum, posted by Mr. Hot Rod) Gathering 2012 Photos (Glen-L Boatbuilding Galleries) Gathering 2012 (Thread on Glen-L's Boatbuilder Forum ) Glen-L Boat Video Directory - Gathering videos (2007-2012) (KaneCustomBoats.com)

Gathering of Glen-L Boatbuilders at Lake Nickajack Tennessee, September 20-22, 2013. The highlight of our boating season was the 2013 edition of the Glen-L Boatbuilder Gathering held at Lake Nickajack, Tennessee. We had a great time at G7 and would like to thank everyone who made it happen. The hospitality and camaraderie at this event keeps us coming back every year ! We're already making plans for next year... My friend Nick made the trip again this year and shot a lot of video. Here's the first cut of the G7 Tennessee River Run : Click the 'Play' button (>) to see the video. I'd like to thank the event organizers and everyone who attended the Gathering, and Nick for shooting the videos. We'll post more photos and videos soon ! Click on the links below to see more photos and videos of the event : Gathering 2013 Photos (Glen-L Boatbuilding Galleries ) Glen-L Boatbuilder Gathering Videos (2007-2014) (KaneCustomBoats.com) Gathering 2013 (Thread on Glen-L's Boatbuilder Forum ) Gathering 7 Video Clips (Glen-L Boatbuilder Forum )